Prosurge’s BP25V/PN50 is Class I and Class II (IEC 61643-11) combined 2-pole SPD, designed for low-voltage power supply lightning current & surge protection, especially for location of high risk exposure or LPZ 0-2 building entrances (IEC 62305-4) to against the damage from direct or close lightning strikes.

BP25V../pn50 ensures remarkable lightning current discharge capacity of 25kA 10/350μs for L-N and 50kA 10/350μs for N-PE, and lower voltage protection level. It significantly limits and extinguishes the follow current, making it ideal for use in various low-voltage power distribution.

BP25V/…/PN50 is prewired and easy for electrical installation of TN/TT single phase system as “1+1” protection circuit.

• TUV certified T1+ T2 SPD per IEC/EN 61643-11 standard
• Prewired two poles SPD (“1+1” circuit) for use in single phase
• Unique thermal disconnector design provides quick thermal response and secure disconnection
• Lightning current capacity up to 25kA10/350μs(L-N), 50kA 10/350μs( (N-PE)
• Surge current capability up to 100kA 8/20μs
• Low voltage protection level
• High short-circuit current rating up to 50kArms, suitable for application in most AC power systems.
• Degradation failure indication and optional remote signal contact.
• Pluggable module for easy replacement without the need to remove system wiring.
• Wide operating temperature -40ºC ~85ºC
• 35mm DIN-rail mounting
• Comply with UL1449 5^th, IEEE C62.41,CSA C22.2 standards

The BP25V 2P is class I & class II (or T1+T2 ) prewired two pole SPD designed for low-voltage power system lightning current & surge protection, especially for location of high risk exposure or LPZ 0-2 building entrances ( IEC 62305-4) to against the damage from direct or close lightning strikes.

With built in PROSURGE high energy MOV, BP25V 2P ensures remarkable lightning current discharge capacity up to 25 kA 10/350μs. The unique design of thermal protection provides quick thermal response and secure disconnection. B25V 2P is ideal protection for environments with frequent switching operations or lightning strikes.

• TUV certified T1+ T2 SPD per IEC/EN 61643-11 standard.
• Prewired two poles SPD (“2+0” circuit) for use in single phase or two phase systems
• Unique thermal disconnector design provides quick thermal response and secure disconnection
• Lightning current capacity up to 25 kA10/350μs
• Surge current capability up to 100kA 8/20μs
• Low voltage protection level
• High short-circuit current rating up to 50kArms, suitable for application in most AC power systems.
• Degradation failure indication and optional remote signal contact.
• Pluggable module for easy replacement without the need to remove system wiring.
• Wide operating temperature -40ºC ~85ºC
• 35mm DIN-rail mounting
• Comply with UL1449 5^th, IEEE C62.41,CSA C22.2 standards

The BP25V 3P is class I & class II (or T1+T2 ) prewired three poles SPD designed for low-voltage power system lightning current & surge protection, especially for location of high risk exposure or LPZ 0-2 building entrances ( IEC 62305-4) to against the damage from direct or close lightning strikes.

With built in PROSURGE high energy MOV, BP25V 3P ensures remarkable lightning current discharge capacity up to 25 kA 10/350μs. The unique design of thermal protection provides quick thermal response and secure disconnection. B25V 3P is ideal protection for environments with frequent switching operations or lightning strikes.

• TUV certified T1+ T2 SPD per IEC/EN 61643-11 standard.
• Prewired three poles SPD (“3+0” circuit) for use in three phase IT / TN-C systems
• Unique thermal disconnector design provides quick thermal response and secure disconnection
• Lightning current capacity up to 25 kA10/350μs
• Surge current capability up to 100kA 8/20μs
• Low voltage protection level
• High short-circuit current rating up to 50kArms, suitable for application in most AC power systems.
• Degradation failure indication and optional remote signal contact.
• Pluggable module for easy replacement without the need to remove system wiring.
• Wide operating temperature -40ºC ~85ºC
• 35mm DIN-rail mounting
• Comply with UL1449 5^th, IEEE C62.41,CSA C22.2 standards

The BP25V 4P is class I & class II (or T1+T2 ) prewired four poles SPD designed for low-voltage power system lightning current & surge protection, especially for location of high risk exposure or LPZ 0-2 building entrances ( IEC 62305-4) to against the damage from direct or close lightning strikes.

With built in PROSURGE high energy MOV, BP25V 4P ensures remarkable lightning current discharge capacity up to 25 kA 10/350μs. The unique design of thermal protection provides quick thermal response and secure disconnection. B25V 4P is ideal protection for environments with frequent switching operations or lightning strikes.

• TUV certified T1+ T2 SPD per IEC/EN 61643-11 standard.
• Prewired three poles SPD (“4+0” circuit) for use in three phase TN / TT systems.
• Unique thermal disconnector design provides quick thermal response and secure disconnection
• Lightning current capacity up to 25 kA10/350μs
• Surge current capability up to 100kA 8/20μs
• Low voltage protection level
• High short-circuit current rating up to 50kArms, suitable for application in most AC power systems.
• Degradation failure indication and optional remote signal contact.
• Pluggable module for easy replacement without the need to remove system wiring.
• Wide operating temperature -40ºC ~85ºC
• 35mm DIN-rail mounting
• Comply with UL1449 5^th, IEEE C62.41,CSA C22.2 standards

The BP25V/…3PN100 is class I & class II (or T1+T2 ) prewired four poles SPD designed for low-voltage power system lightning current & surge protection, especially for location of high risk exposure or LPZ 0-2 building entrances ( IEC 62305-4) to against the damage from direct or close lightning strikes.

With built in PROSURGE high energy MOV and GDT, BP25V 3PN100 ensures remarkable lightning current discharge capacity up to 25 kA 10/350μs(L-N) and 100kA 10/350μs(N-PE). The unique design of thermal protection provides quick thermal response and secure disconnection. B25V 3PN100 is ideal protection for environments with frequent switching operations or lightning strikes.

• TUV certified T1+ T2 SPD per IEC/EN 61643-11 standard
• Prewired four poles SPD (“3+1” circuit) for use in three phase TN/TT systems
• Unique thermal disconnector design provides quick thermal response and secure disconnection
• Lightning current capacity up to 25kA10/350μs(L-N), 100kA 10/350μs( (N-PE)
• Surge current capability up to 100kA 8/20μs(L-N), 150kA(N-PE)
• Low voltage protection level
• High short-circuit current rating up to 50kArms, suitable for application in most AC power systems.
• Degradation failure indication and optional remote signal contact.
• Pluggable module for easy replacement without the need to remove system wiring.
• Wide operating temperature -40ºC ~85ºC
• 35mm DIN-rail mounting
• Comply with UL1449 5^th, IEEE C62.41,CSA C22.2 standards