Typical Applications:

• Commercial
• Industrial
• Communications
• Renewable energy
• Critical power (hospitals, data centers, etc)

Features

• High performance SPD inbuilt with Iimp 12.5kA 10/350 for Class I and In 20kA 8/20 for Class II application (based on the selected model), comply with IEC/EN 61643-1/11, UL1449 5th standards;
• Pluggable module of SPD for easy replacement
• Self protected by PROSUGE innovated Surge circuit breaker technology, SPD will never stop service in the life time and no fire risk while in the end of life
• Intelligent monitor (iSPM) help end user to know all accurateinformation about power system abnormal conditions in order to take action in time.
• Surge events and system fault events logging, 999 events recording data (ISPM).
• Buzzer alarm when the number of surge eventsreaches a settable number (LEC-AT)
• OLED display is convenient for end user to view presentor history information
• With RS485 networkand Ethernet, end user can control and manage the system in short or remote distance
• Visual and audible alarm for several functions, likeSPD degradation or Failure, abnormal Power system conditions, back up CB or Fuse open, Surge event counting to a pre-set alarm number etc.
• Easy installation
• IP20 enclosure to resist dirt, dust and water

Configure & Ordering Information:

iSPD	-02	/C	320	-PN	-SCB
Intelligent SPD Model series	Intelligent Surge & Power Monitor Model Series	SPD category per IEC/EN	Max. operating voltage (Uc)	SPD config	Back up Surge Circuit Breaker
iSPD	-02 : iSPM02 -AT : LEC-AT …	B: Class I or T1 C: Class II or T2	320:75VAC~320VAC	2:  Two poles(2+0) PN: Two poles(1+1) 3: Three poles(3+0) 4: Four poles(4+0) 3PN: Four poles(3+1)	With or without

Main Parts

The iSPD is composed of three essential parts: surge protective device (SPD), intelligent surge & power monitor (iSPM) or Lightning/Surge event counter LEC-AT and surge circuit breaker (SCB).

• SPD

PROSURGE high performance MOV base SPDs (Class I or Class II per IEC 61643-11 or Type 1ca per UL1449 5th) of iSPD can protect sensitive equipment from the harmful transient voltage surges resulting from:

• Direct and indirect lightning strikes
• Power company load switching
• Upstream load switching at other facilities

• Surge Circuit Breaker (SCB)

PROSURGE SCB provides backup over-current protection for the SPD, which is fully coordinated with the surge protective device. Comparing to normal backup circuit breaker/fuse, the integrated PROSURGE SCB achieve a better balance between surge withstand performance (no tripping while expected surge occurs) and sharp reaction against short circuit and abnormal leakage current.

(For detailed models technical specification, please check in other tabs.)